HTW Hardened Tongued Washers

Hardened washers with key at inner bore, the key of which limits the radial movement on a keyed shaft and the hardening of which protects soft lockwashers. Very useful as a spacer in assemblies and protection against heavy rotational thrust loads.



Identification Bore
(inches)
Outside Dia
(inches)
Thickness
(inches)
CAD
HTW-00 0.406 0.798 0.125 CAD
HTW-01 0.484 0.923 0.125 CAD
HTW-02 0.601 1.173 0.125 CAD
HTW-03 0.679 1.173 0.125 CAD
HTW-04 0.801 1.423 0.125 CAD
HTW-05 0.989 1.860 0.125 CAD
HTW-06 1.193 1.860 0.125 CAD
HTW-07 1.396 2.173 0.125 CAD
HTW-08 1.583 2.735 0.178 CAD
HTW-09 1.792 2.735 0.178 CAD
HTW-10 1.992 3.235 0.178 CAD
HTW-11 2.182 3.235 0.178 CAD
HTW-12 2.400 3.735 0.178 CAD
HTW-13 2.588 3.735 0.178 CAD
HTW-14 2.791 3.735 0.178 CAD
HTW-15 2.973 4.173 0.178 CAD
HTW-16 3.177 4.173 0.178 CAD
HTW-17 3.395 4.610 0.178 CAD
HTW-18 3.582 5.110 0.178 CAD
HTW-19 3.800 5.110 0.178 CAD
HTW-20 3.988 5.610 0.178 CAD
HTW-21 4.192 5.610 0.178 CAD
HTW-22 4.395 6.110 0.360 CAD
HTW-24 4.801 6.735 0.360 CAD
HTW-26 5.191 7.485 0.360 CAD
HTW-28 5.582 7.485 0.360 CAD
HTW-30 5.983 7.985 0.360 CAD
HTW-32 6.389 8.485 0.360 CAD
HTW-34 6.764 8.985 0.360 CAD
HTW-36 7.171 9.235 0.360 CAD
HTW-38 7.577 9.735 0.360 CAD
HTW-40 7.982 10.110 0.360 CAD

This web page and all information contained 2017, Whittet-Higgins Co.

Whittet-Higgins Home