CC-A Clamp Collar

CC.GIF

Split Collars with a locking screw were an outgrowth of threaded adjustable retaining devices made and used by precision instruments and machinery manufacturers in the early twentieth century.

These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or limiters. They become an easy way to create a shoulder eliminating the need to machine expensive keyways, splines and shoulders on rods, shafts, and spindles.

This model is a One piece single slit design, made with aluminum (usually 2024) bright finished and blackened alloy steel socket thread cap screw.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Bore
(inches)
Outside Dia
(inches)
Face Dia
(inches)
Width
(inches)
Axial Load
(lbs)
Lockscrew
CAD
CC-02A 0.125 0.625 0.406 0.281 100 4-40 CAD
CC-03A 0.188 0.625 0.406 0.281 110 4-40 CAD
CC-04A 0.250 0.625 0.406 0.281 115 4-40 CAD
CC-05A 0.313 0.688 0.469 0.281 120 4-40 CAD
CC-06A 0.375 0.875 0.594 0.344 190 6-32 CAD
CC-07A 0.438 0.938 0.656 0.344 200 6-32 CAD
CC-08A 0.500 1.125 0.781 0.438 370 10-32 CAD
CC-09A 0.563 1.313 0.922 0.438 375 10-32 CAD
CC-10A 0.625 1.313 0.922 0.438 380 10-32 CAD
CC-11A 0.688 1.500 1.063 0.500 730 1/4-28 CAD
CC-12A 0.750 1.500 1.063 0.500 735 1/4-28 CAD
CC-13A 0.813 1.625 1.188 0.500 745 1/4-28 CAD
CC-14A 0.875 1.625 1.188 0.500 750 1/4-28 CAD
CC-15A 0.938 1.750 1.313 0.500 760 1/4-28 CAD
CC-16A 1.000 1.750 1.313 0.500 765 1/4-28 CAD
CC-17A 1.063 1.875 1.438 0.500 775 1/4-28 CAD
CC-18A 1.125 1.875 1.438 0.500 780 1/4-28 CAD
CC-19A 1.188 2.063 1.625 0.500 790 1/4-28 CAD
CC-20A 1.250 2.063 1.625 0.500 795 1/4-28 CAD
CC-21A 1.313 2.250 1.719 0.563 850 1/4-28 CAD
CC-22A 1.375 2.250 1.719 0.563 860 1/4-28 CAD
CC-23A 1.438 2.375 1.844 0.563 865 1/4-28 CAD
CC-24A 1.500 2.375 1.844 0.563 875 1/4-28 CAD
CC-25A 1.563 2.375 1.844 0.563 880 1/4-28 CAD
CC-26A 1.625 2.750 2.219 0.625 1310 5/16-24 CAD
CC-27A 1.688 2.750 2.219 0.625 1320 5/16-24 CAD
CC-28A 1.750 2.750 2.219 0.625 1330 5/16-24 CAD
CC-29A 1.813 2.875 2.344 0.625 1340 5/16-24 CAD
CC-30A 1.875 2.875 2.344 0.625 1345 5/16-24 CAD
CC-31A 1.938 3.000 2.469 0.625 1355 5/16-24 CAD
CC-32A 2.000 3.000 2.469 0.625 1365 5/16-24 CAD
CC-33A 2.063 3.250 2.719 0.750 1490 5/16-24 CAD
CC-34A 2.125 3.250 2.719 0.750 1495 5/16-24 CAD
CC-35A 2.188 3.250 2.719 0.750 1505 5/16-24 CAD
CC-36A 2.250 3.250 2.719 0.750 1520 5/16-24 CAD
CC-37A 2.313 3.500 2.969 0.750 1530 5/16-24 CAD
CC-38A 2.375 3.500 2.969 0.750 1545 5/16-24 CAD
CC-39A 2.438 3.750 3.219 0.875 2490 3/8-24 CAD
CC-40A 2.500 3.750 3.219 0.875 2500 3/8-24 CAD
CC-41A 2.563 4.000 3.469 0.875 2515 3/8-24 CAD
CC-42A 2.625 4.000 3.469 0.875 2525 3/8-24 CAD
CC-43A 2.688 4.000 3.469 0.875 2540 3/8-24 CAD
CC-44A 2.750 4.000 3.469 0.875 2550 3/8-24 CAD
CC-45A 2.813 4.250 3.719 0.875 2565 3/8-24 CAD
CC-46A 2.875 4.250 3.719 0.875 2580 3/8-24 CAD
CC-47A 2.938 4.250 3.719 0.875 2590 3/8-24 CAD
CC-48A 3.000 4.250 3.719 0.875 2605 3/8-24 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home