CC Clamp Collar

CC.GIF

Split Collars with a locking screw were an outgrowth of threaded adjustable retaining devices made and used by precision instruments and machinery manufacturers in the early twentieth century.

These CLAMP COLLARS are often adequate to position and lock to shaft cams, conveyor rolls, gears, pulleys, sheaves, sprocket and the multitude of other machine components where exacting adjustment is not required to transmit thrust and torque loads. They are great as adjustable shaft spacers or limiters. They become an easy way to create a shoulder eliminating the need to machine expensive keyways, splines and shoulders on rods, shafts, and spindles.

This model is a One piece single slit design, made with low carbon steel with a black oxide finish and blackened alloy steel socket head cap screws.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Bore
(inches)
Outside Dia
(inches)
Face Dia
(inches)
Width
(inches)
Axial Load
(lbs)
Lockscrew
CAD
CC-02 0.125 0.625 0.406 0.281 220 4-40 CAD
CC-03 0.188 0.625 0.406 0.281 235 4-40 CAD
CC-04 0.250 0.625 0.406 0.281 250 4-40 CAD
CC-05 0.313 0.688 0.469 0.281 260 4-40 CAD
CC-06 0.375 0.875 0.594 0.344 410 6-32 CAD
CC-07 0.438 0.938 0.656 0.344 425 6-32 CAD
CC-08 0.500 1.125 0.781 0.438 790 10-32 CAD
CC-09 0.563 1.313 0.922 0.438 805 10-32 CAD
CC-10 0.625 1.313 0.922 0.438 820 10-32 CAD
CC-11 0.688 1.500 1.063 0.500 1555 1/4-28 CAD
CC-12 0.750 1.500 1.063 0.500 1570 1/4-28 CAD
CC-13 0.813 1.625 1.188 0.500 1585 1/4-28 CAD
CC-14 0.875 1.625 1.188 0.500 1600 1/4-28 CAD
CC-15 0.938 1.750 1.313 0.500 1620 1/4-28 CAD
CC-16 1.000 1.750 1.313 0.500 1635 1/4-28 CAD
CC-17 1.063 1.875 1.438 0.500 1650 1/4-28 CAD
CC-18 1.125 1.875 1.438 0.500 1665 1/4-28 CAD
CC-19 1.188 2.063 1.625 0.500 1680 1/4-28 CAD
CC-20 1.250 2.063 1.625 0.500 1695 1/4-28 CAD
CC-21 1.313 2.250 1.719 0.563 1810 1/4-28 CAD
CC-22 1.375 2.250 1.719 0.563 1830 1/4-28 CAD
CC-23 1.438 2.375 1.844 0.563 1845 1/4-28 CAD
CC-24 1.500 2.375 1.844 0.563 1865 1/4-28 CAD
CC-25 1.563 2.375 1.844 0.563 1880 1/4-28 CAD
CC-26 1.625 2.750 2.219 0.625 2790 5/16-24 CAD
CC-27 1.688 2.750 2.219 0.625 2810 5/16-24 CAD
CC-28 1.750 2.750 2.219 0.625 2830 5/16-24 CAD
CC-29 1.813 2.875 2.344 0.625 2850 5/16-24 CAD
CC-30 1.875 2.875 2.344 0.625 2870 5/16-24 CAD
CC-31 1.938 3.000 2.469 0.625 2890 5/16-24 CAD
CC-32 2.000 3.000 2.469 0.625 2910 5/16-24 CAD
CC-33 2.063 3.250 2.719 0.750 3170 5/16-24 CAD
CC-34 2.125 3.250 2.719 0.750 3190 5/16-24 CAD
CC-35 2.188 3.250 2.719 0.750 3210 5/16-24 CAD
CC-36 2.250 3.250 2.719 0.750 3235 5/16-24 CAD
CC-37 2.313 3.500 2.969 0.750 3260 5/16-24 CAD
CC-38 2.375 3.500 2.969 0.750 3290 5/16-24 CAD
CC-39 2.438 3.750 3.219 0.875 5300 3/8-24 CAD
CC-40 2.500 3.750 3.219 0.875 5325 3/8-24 CAD
CC-41 2.563 4.000 3.469 0.875 5350 3/8-24 CAD
CC-42 2.625 4.000 3.469 0.875 5380 3/8-24 CAD
CC-43 2.688 4.000 3.469 0.875 5410 3/8-24 CAD
CC-44 2.750 4.000 3.469 0.875 5435 3/8-24 CAD
CC-45 2.813 4.250 3.719 0.875 5465 3/8-24 CAD
CC-46 2.875 4.250 3.719 0.875 5495 3/8-24 CAD
CC-47 2.938 4.250 3.719 0.875 5520 3/8-24 CAD
CC-48 3.000 4.250 3.719 0.875 5550 3/8-24 CAD
CC-50 3.125 4.500 3.969 0.875 5605 3/8-24 CAD
CC-52 3.250 4.500 3.969 0.875 5660 3/8-24 CAD
CC-54 3.375 4.750 4.219 0.875 5715 3/8-24 CAD
CC-56 3.500 4.750 4.219 0.875 5770 3/8-24 CAD
CC-58 3.625 5.000 4.469 0.875 5825 3/8-24 CAD
CC-60 3.750 5.000 4.469 0.875 5880 3/8-24 CAD
CC-62 3.875 5.250 4.719 0.875 5935 3/8-24 CAD
CC-64 4.000 5.250 4.719 0.875 5995 3/8-24 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home