CNM Clampnut

CNB.GIF

This series of CLAMP NUTS has the bearing threads specified to the ISO Metric standards, fits, and tolerances thus are fully interchangeable with metric retaining devices increasingly used in bearing and other power transmission assemblies. These threads are in accordance with the ISO Standard 965, however, the thread is upgraded to 5H to make comparable with American quality.

The bearing face - the side with the clearance relief above the face diameter - is machined square to the axis of the pitch diameter of the threads whereby the runout for one revolution has a total indicator reading variance no greater than: 50 Microns (.002 inches) for sizes 00 to 14, 100 Microns (.004 inches) for sizes 15 to 40.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Thread
Outside Dia
(mm)
Face Dia
(mm)
Width
(mm)
Axial Load
(kN)
Lockscrew
CAD
CNM-00 M10 X ,75 28,6 15,7 9,8 32 M4 CAD
CNM-01 M12 x 1,0 28,6 18,0 9,8 36 M4 CAD
CNM-02 M15 x 1,0 33,3 20,6 9,8 44 M4 CAD
CNM-03 M17 x 1,0 38,1 23,6 13,0 66 M6 CAD
CNM-04 M20 x 1,0 44,5 28,4 13,0 77 M6 CAD
CNM-044 M22 x 1,0 47,6 32,5 13,0 88 M6 CAD
CNM-05 M25 x 1,5 47,6 32,5 13,0 88 M6 CAD
CNM-056 M28 x 1,5 52,4 38,1 13,0 98 M6 CAD
CNM-06 M30 x 1,5 52,4 38,1 13,0 98 M6 CAD
CNM-064 M32 x 1,5 60,3 46,0 13,0 113 M6 CAD
CNM-07 M35 x 1,5 60,3 46,0 13,0 113 M6 CAD
CNM-08 M40 x 1,5 63,5 50,8 13,0 118 M6 CAD
CNM-09 M45 x 1,5 68,1 57,9 13,0 124 M6 CAD
CNM-10 M50 x 1,5 76,2 61,7 13,0 139 M6 CAD
CNM-11 M55 x 2,0 82,6 67,3 18,0 210 M8 CAD
CNM-12 M60 x 2,0 88,9 72,1 18,0 224 M8 CAD
CNM-13 M65 x 2,0 95,3 77,7 18,0 239 M8 CAD
CNM-14 M70 x 2,0 101,6 84,1 18,0 253 M8 CAD
CNM-15 M75 x 2,0 108,0 90,4 18,0 267 M8 CAD
CNM-16 M80 x 2,0 114,3 97,5 18,0 280 M8 CAD
CNM-17 M85 x 2,0 120,7 102,4 18,0 288 M8 CAD
CNM-18 M90 x 2,0 123,7 108,7 18,0 292 M8 CAD
CNM-19 M95 x 2,0 134,9 115,8 21,1 382 M10 CAD
CNM-20 M100 x 2,0 139,7 122,2 21,1 390 M10 CAD
CNM-21 M105 x 2,0 146,1 127,0 21,1 405 M10 CAD
CNM-22 M110 x 2,0 152,4 134,1 21,1 420 M10 CAD
CNM-24 M120 x 2,0 161,8 144,5 21,1 431 M10 CAD
CNM-26 M130 x 2,0 174,5 157,0 24,3 533 M12 CAD
CNM-28 M140 x 2,0 184,2 165,9 24,3 545 M12 CAD
CNM-30 M150 x 2,0 196,9 179,3 24,3 560 M12 CAD
CNM-32 M160 x 3,0 203,2 188,7 24,3 564 M12 CAD
CNM-34 M170 x 3,0 215,9 204,0 24,3 599 M12 CAD
CNM-36 M180 x 3,0 228,6 212,7 25,4 673 M12 CAD
CNM-38 M190 x 3,0 241,3 223,0 25,4 681 M12 CAD
CNM-40 M200 x 3,0 247,7 232,6 25,4 687 M12 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home