This lightweight and smaller dimensional series of locknuts is an AFBMA standard for nuts with bores ranging from 4 5/16 inches to over 37 inches. The sizes designated 022 through 088 which are shown here make a good continuation of the NT series where the application of a designer or engineer could better use a lighter weight locknut with a smaller outside diameter and less thickness.
As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results. |
Identification | Thread | Outside Dia (inches) | Face Dia (inches) | Width (inches) | Axial Load (lbs) | Lockwasher | CAD |
---|---|---|---|---|---|---|---|
N-022 | 4.325-12 | 5.312 | 4.901 | 0.791 | 77500 | W-022 | CAD |
N-024 | 4.716-12 | 5.688 | 5.313 | 0.823 | 81500 | W-024 | CAD |
N-026 | 5.106-12 | 6.125 | 5.703 | 0.885 | 92600 | W-026 | CAD |
N-028 | 5.497-12 | 6.500 | 6.109 | 0.948 | 99800 | W-028 | CAD |
N-030 | 5.888-12 | 7.125 | 6.688 | 0.979 | 122800 | W-030 | CAD |
N-032 | 6.284-8 | 7.500 | 7.094 | 1.041 | 130900 | W-032 | CAD |
N-034 | 6.659-8 | 7.875 | 7.484 | 1.073 | 136800 | W-034 | CAD |
N-036 | 7.066-8 | 8.250 | 7.875 | 1.104 | 139700 | W-036 | CAD |
N-038 | 7.472-8 | 8.688 | 8.266 | 1.135 | 148300 | W-038 | CAD |
N-040 | 7.847-8 | 9.437 | 8.750 | 1.198 | 194700 | W-040 | CAD |
N-044 | 8.628-8 | 10.250 | 9.531 | 1.260 | 212700 | W-044 | CAD |
N-048 | 9.442-6 | 11.438 | 10.625 | 1.354 | 273300 | PP-48 | CAD |
N-052 | 10.192-6 | 12.188 | 11.406 | 1.416 | 291200 | PP-52 | CAD |
N-056 | 11.004-6 | 13.000 | 12.219 | 1.510 | 316100 | PP-56 | CAD |
N-060 | 11.785-6 | 14.188 | 13.219 | 1.573 | 385600 | PP-60 | CAD |
N-064 | 12.562-6 | 15.000 | 14.031 | 1.666 | 419300 | PP-64 | CAD |
N-068 | 13.303-5 ACME | 15.750 | 14.813 | 1.791 | 434000 | PP-68 | CAD |
N-072 | 14.134-5 ACME | 16.500 | 15.500 | 1.791 | 446200 | PP-72 | CAD |
N-076 | 14.921-5 ACME | 17.755 | 16.625 | 1.916 | 553000 | PP-76 | CAD |
N-080 | 15.709-5 ACME | 18.505 | 17.438 | 2.073 | 595000 | PP-80 | CAD |
N-084 | 16.495-5 ACME | 19.318 | 18.188 | 2.073 | 605000 | PP-84 | CAD |
N-088 | 17.283-5 ACME | 20.505 | 19.25 | 2.385 | 780000 | PP-88 | CAD |
This web page and all information contained ©2024, Whittet-Higgins Co.
Whittet-Higgins Home