NSHM Shoelok

NSH.GIF

The SHOELOK hardened steel mechanical lock retaining nut adjusts, pre-loads, and secures bearings and other components to the shafts and spindles of power assemblies with consistent precision squareness, axial location, and, when carefully uniformly locked, centerline alignment. The lock develops peripherally when set screws, turned with hex drive wrenches, force shoes into deep thread contact. This retaining device requires sufficient radial clearance in which to turn these set screws. The hardened quality makes them exceptionally useful in heavy load applications where shock and vibration are endemic. This version of the SHOELOK is made with ISO Metric threads made to closer tolerances as are all metric Whittet-Higgins products.

As with all precision retaining devices, care must be taken during assembly to assure premium performance. Please open and review our installation instructions for proper technique and best results.



Identification Thread
Outside Dia
(mm)
Face Dia
(mm)
Width
(mm)
Axial Load
(kN)
Lockscrew
CAD
NSHM-03 M17 x 1,0 28,5 23,8 10,3 95 8-32 CAD
NSHM-04 M20 x 1,0 34,8 28,6 12,2 135 10-24 CAD
NSHM-05 M25 x 1,5 39,6 32,5 13,5 173 10-24 CAD
NSHM-06 M30 x 1,5 44,5 38,1 14,2 198 1/4-20 CAD
NSHM-07 M35 x 1,5 52,3 46,0 14,2 234 1/4-20 CAD
NSHM-08 M40 x 1,5 57,2 50,8 14,2 246 1/4-20 CAD
NSHM-09 M45 x 1,5 64,3 57,9 14,2 275 1/4-20 CAD
NSHM-10 M50 x 1,5 68,3 62,0 16,0 312 1/4-20 CAD
NSHM-11 M55 x 2,0 75,4 67,6 16,0 338 1/4-20 CAD
NSHM-12 M60 x 2,0 80,3 72,1 16,8 369 1/4-20 CAD
NSHM-13 M65 x 2,0 85,9 77,7 18,3 419 1/4-20 CAD
NSHM-14 M70 x 2,0 92,2 84,1 18,3 448 1/4-20 CAD
NSHM-15 M75 x 2,0 98,6 90,4 19,1 488 1/4-20 CAD
NSHM-16 M80 x 2,0 105,7 97,5 19,1 528 1/4-20 CAD
NSHM-17 M85 x 2,0 112,0 102,4 19,8 575 5/16-18 CAD
NSHM-18 M90 x 2,0 118,4 108,7 22,4 670 5/16-18 CAD
NSHM-19 M95 x 2,0 125,5 115,8 23,1 740 5/16-18 CAD
NSHM-20 M100 x 2,0 131,8 122,2 23,9 793 5/16-18 CAD
NSHM-21 M105 x 2,0 138,2 127,0 23,9 830 5/16-18 CAD
NSHM-22 M110 x 2,0 145,3 134,1 24,6 900 5/16-18 CAD
NSHM-24 M120 x 2,0 155,7 144,5 26,2 1090 3/8-16 CAD
NSHM-26 M130 x 2,0 171,5 157,2 27,7 1278 3/8-16 CAD
NSHM-28 M140 x 2,0 180,1 165,9 30,2 1406 3/8-16 CAD
NSHM-30 M150 x 2,0 195,3 179,3 31,8 1608 3/8-16 CAD
NSHM-32 M160 x 3,0 204,7 189,0 32,5 1680 7/16-14 CAD
NSHM-34 M170 x 3,0 220,0 204,0 34,0 1893 7/16-14 CAD
NSHM-36 M180 x 3,0 230,1 212,9 35,8 2044 7/16-14 CAD
NSHM-38 M190 x 3,0 240,5 223,0 35,8 2082 7/16-14 CAD
NSHM-40 M200 x 3,0 249,9 232,7 38,1 2231 7/16-14 CAD

This web page and all information contained ©2024, Whittet-Higgins Co.

Whittet-Higgins Home