BMS Bearhug

BH.GIF

This series of BEARHUG corrosion resistant locknuts encompasses all the BEARHUG qualities of precision, self-locking and easier installation with assurance against corrosion inherent in Type 303 stainless steel from which they are made, in a format with a thread made to ISO Metric standards, with a tolerance grade and position of 4H. The collar for this series is made of nylon which is more impervious to contamination of the environment and able to withstand temperatures up to 250F.

The runout of the bearing face to the pitch diameter of the threads has a one revolution total indicator reading no greater than: 10 microns for sizes 00 through 04, 15 microns for sizes 05 through 20, 20 microns for sizes 21 through 40.



Identification Thread
Outside Dia
(mm)
Face Dia
(mm)
Width
(mm)
Axial Load
(kN)
CAD
BMS-00 M10 X ,75 18,0 13,5 7,0 7 CAD
BMS-01 M12 x 1,0 22,0 17,0 8,0 11 CAD
BMS-02 M15 x 1,0 25,0 21,0 8,5 14 CAD
BMS-03 M17 x 1,0 28,0 24,0 9,0 17 CAD
BMS-04 M20 x 1,0 32,0 26,0 10,0 24 CAD
BMS-044 M22 x 1,0 34,0 28,0 10,5 27 CAD
BMS-05 M25 x 1,5 38,0 32,0 11,0 28 CAD
BMS-056 M28 x 1,5 42,0 36,0 11,0 31 CAD
BMS-06 M30 x 1,5 45,0 38,0 11,5 36 CAD
BMS-064 M32 x 1,5 48,0 40,0 11,5 38 CAD
BMS-07 M35 x 1,5 52,0 44,0 12,0 44 CAD
BMS-08 M40 x 1,5 58,0 50,0 12,0 49 CAD
BMS-09 M45 x 1,5 65,0 56,0 13,0 61 CAD
BMS-10 M50 x 1,5 70,0 61,0 13,0 65 CAD
BMS-11 M55 x 2,0 75,0 67,0 15,0 71 CAD
BMS-12 M60 x 2,0 80,0 73,0 15,0 73 CAD
BMS-13 M65 x 2,0 85,0 79,0 15,0 75 CAD
BMS-14 M70 x 2,0 92,0 85,0 17,0 91 CAD
BMS-15 M75 x 2,0 98,0 90,0 17,0 96 CAD

This web page and all information contained 2017, Whittet-Higgins Co.

Whittet-Higgins Home