BHS Bearhug

BH.GIF

This series of BEARHUG corrosion resistant locknuts encompasses all the BEARHUG qualities of precision, self-locking and easier installation with assurance against corrosion inherent in Type 303 stainless steel from which they are made. The collar for this series is made of nylon which is more impervious to contamination of the environment and able to withstand temperatures up to 250F.

The runout of the bearing face to the pitch diameter of the threads has a one revolution total indicator reading no greater than: .0004 inches for sizes 00 through 04, .0006 inches for sizes 05 through 20, .0008 inches for sizes 21 through 40.

Seating face surface is within 40 microinches.



Identification Thread
Outside Dia
(inches)
Face Dia
(inches)
Width
(inches)
Axial Load
(lbs)
CAD
BHS-00 .391-32 0.750 0.625 0.281 2100 CAD
BHS-01 .469-32 0.875 0.719 0.375 3800 CAD
BHS-02 .586-32 1.000 0.813 0.375 4300 CAD
BHS-03 .664-32 1.125 0.938 0.406 5400 CAD
BHS-04 .781-32 1.375 1.125 0.406 6700 CAD
BHS-05 .969-32 1.563 1.281 0.469 8400 CAD
BHS-06 1.173-18 1.750 1.500 0.469 8600 CAD
BHS-07 1.376-18 2.063 1.813 0.500 10700 CAD
BHS-08 1.563-18 2.250 2.000 0.500 11900 CAD
BHS-09 1.767-18 2.531 2.281 0.500 13400 CAD
BHS-10 1.967-18 2.688 2.438 0.563 16000 CAD
BHS-11 2.157-18 2.969 2.656 0.563 17800 CAD
BHS-12 2.360-18 3.156 2.844 0.594 19200 CAD
BHS-13 2.548-18 3.375 3.063 0.625 22200 CAD
BHS-14 2.751-18 3.625 3.313 0.625 23300 CAD
BHS-15 2.933-12 3.875 3.563 0.656 23600 CAD
BHS-16 3.137-12 4.156 3.844 0.656 25400 CAD
BHS-17 3.340-12 4.406 4.031 0.719 29200 CAD
BHS-18 3.527-12 4.656 4.281 0.781 35700 CAD
BHS-19 3.730-12 4.938 4.563 0.813 40300 CAD
BHS-20 3.918-12 5.188 4.813 0.844 44700 CAD
BHS-21 4.122-12 5.438 5.000 0.875 46600 CAD
BHS-22 4.325-12 5.719 5.281 0.938 55600 CAD
BHS-24 4.716-12 6.125 5.688 0.938 59000 CAD

This web page and all information contained 2017, Whittet-Higgins Co.

Whittet-Higgins Home